TechDiamondTools Kit of 3 Diamond Polishing Compound Polishing Paste USA Made 14000 100000 200000 Grit for Marble Glass Metal Rock Jewelry Resin Silver Gemstone with 10% of Diamond Powder

This buffing compound has worked exceptionally well. I have used it twice so far and it performed just as expected.My first use was on a bathroom faucet. There was some sloppy casting and finishing work on a small section of the faucet that my wife just finallly got tired of looking at. She wanted to replace it. Instead, I started with the 1,050 grit and a dremel with buffing attachment to make quick work of cleaning up the physical blemishes and matching the rest of the area. I moved to 1,500 grit with the tool and a new attachment to refine the finish. Then I used the 3,000 grit and a new attachment to take it to the final finish. Lastly, I used a rag, finger and the 3,000 grit to remove the pattern left by the tool and make everything uniform. It looks great, my wife is pleased and I don’t have to replace the fixture I installed not all that long ago.I also used it to clean up the scratched resin “crystal” of my work watch. All the beatings had left the watch “crystal” scratched and it was difficult to see the small digital display at the bottom of the analog watch face. Using a rag I started with the 1,050 grit and worked my way to the 3,000 grit. The “crystal” is once again shiny and I can see the digital display perfectly well. I didn’t get rid of the deepest gouges but I’m unconcerned as my goal was just to be able to see the display. It took me, maybe, a total of 15 minutes between getting everything out, buffing and rinsing. If I had been more concerned with trying to get rid of more scratches it may have been possible by spending more time but the goal was accomplished.

This product met all my expectations. It was well packaged and easy to dispense. And worked great on my epoxy resin projects. In fact, I bought a second package knowing I would need (and use) more.

Great price and works well on glass

The polish did help but I probably should have chosen a rougher polish since the scratches are deeper than I thought.

Works well for final polish on edge of granite tile I used a Dremel Mototool with felt buffing cylinders to finish exposed cut edges of black granite floor tile. I did this after pre-finishing the edges with 50, 100, 200, 400, 800, 1500, 3000, and 6000 diamond grit rotary pads. The results were as clean and bright a surface as the factory finished top surface on the black granite tile.

I had a deep scratch in my mineral crystal, deep enough to cast a shadow on the dial of my watch. It's an inexpensive enough watch that I figured I'd risk trying to get it out rather than sending it for glass replacement.The 3000,5000,14000 grit worked perfectly. I used a dremel tool with the polishing wheel and worked up to the high grit, applying moderate pressure in small circular patterns. DO NOT TAPE YOUR DIAL TO SECTION OFF THE SCRATCH. I did that initially and it caused a "step" from where the tape ended and the compound was contacting the glass. Instead, keep the entire face of the watch uncovered and apply pressure localized at the blemish and fan out applying less pressure as you get further away. With this method I was able to get rid of the scratch and step caused be the lower grit with tape. It took about 30 minutes in total, initially it seems like it wasn't going to work but if you keep at it, it works great. I don't know how well ot would work applying by hand, but with the dremel this was a breeze.

Great product. Works great.Dispensers are nice size for storage.

sin instrucciones para el uso. Dificil