KRXNY Power Inverter Converter 2000W 24V DC to 120V AC 60HZ Pure Sine Wave with USB Port LCD Display for RV Off Grid Home Solar

The inverter sent to me was was undamaged and arrived quickly, but it did not work. I contacted the company and explain my problem. They where very nice to deal with and they sent a replacement right away. This one worked as advertised. So far it’s doing its job. I don’t think you can go wrong with this inverter.

So far this unit is doing exactly what I expected it too and has had no issues running my greenhouse. The unit is installed in an outdoor sheltered cabinet and has so far been able to run the pumps and fans in the greenhouse for 24 hours. The unit is not being overtaxed (my thoughts - provides 5.5 Amps at 145W) and at 4 in the morning is still running on about 24.7 volts. We did not have much sun yesterday so this morning the voltage had dropped to 22.9-volts but kept going until power came in from the solar panels. Just now (I took the photo) the voltage had rissen to 28.2-volts and it looks like we will get good sun today. The charge controller you see (silver/green box) is a "Hybrid" solar/wind controller and I am in the process of installing a small trubine to provide extra power at night or on overcast days - just got the pole up yesterday. Will be adding a couple of additional cooling fans today that will plug into the USB port, the internal cooling fans seem to run most of the day so I want to help them out. One thing I couldn't find with this unit is a grounding lug. Most inverters I have used have a grounding lug someplace on the case - I have been told that I can ground it to the yellow/green wire on the terminal block. I have used the terminal block for an outlet (blue outlet box) but I would prefer not to use that location - will probably just ground the case on one of the mounting screws unless someone says not to. The previous unit I had installed only worked for about 30 hours then just stopped, it seemed to sort of "reset" but later quit again. I did not remove it from the circuit (waiting for this unit to arrive) and sometime during the day or night it caused my system fuse (20 Amp) to blow - so I disconnected the broken unit and replaced the fuse and with this unit things are just sailing along. Good job! Will give it a few more days the probably add another star as long as it continues to work.

It's been running 24/7 for a few weeks with a constant load of 10 to 15 amps with no issues. This inverter is strong enough to power a refrigerator or small AC in a pinch.

First of all I open up the box to see no cables just the inverter and a manual, inverter all scratch up but I was still hopeful until I connect my battery nth happened not even a spark no light no power nth this crap was dead on arrival sigh. Just a waste of time do your self a favor buy a different brand its a lot less stressful.

this Power Inverter is working very well now that i understand how it work i am very satisfied i recommend it to anyone

First appearance was rather disappointing. Came with 10 awg cables?!? Disappointing. Fortunately, I have my own 1/0 cable, so take into account that you need to provide your own battery cables when buying this inverter. The manual shows plastic caps to go over the terminals, but none came with the unit. Disappointing. So far unit turns on and handles test load of 95w just fine. AC hardwire is Common (N) RED, Ground YELLOW, and Hot BLACK. Will update review after more proper testing.

I purchased the 2000 W, 24 V inverter two months ago. It has worked fine since I installed it. I have observed surges as high as 2800 W instantaneous and the 2000 W inverter continues to function. It normally operates at only 350 W, with occasional use at 1500 W.

Working good for about 6 months so far, no issues, working as expected.Have done load tests at 250w sustained for 8 hours, no heat issues, worked great.