What are each size extractor?

3/16 (5mm), 1/4 (6mm), 5/16(8mm), 3/8)10mm), 7/16(11mm), 1/2(12mm).

What if the tap is stuck and just spin in aluminium and won"t go in or come out?

That does not sound like a good situation at all. Since it just spins all of the threads should be broken. You might be able to get a pair of need nose pliers in the flutes to grab and pull the tap out. If it won't just pull out by grabbing with needle nose you can add pressure by pulling or side load which may allow it to spin out. To note I am not sure what size hole you are working with you may need to grind down the pliers I keep a set of needle nose that are ground down just for this type of purpose.

These will not work with thread-forming taps, correct?

These are designed to remove broken taps that someone was using to clean or repair threads. Most taps have 4 sides & these extractors go inside of the taps to remove

Manufacturer	Walton Tools
Brand	Walton Tools
Product Dimensions	16.26 x 11.94 x 4.57 cm; 385.55 g
Item model number	18001
Manufacturer part number	18001
Item Weight	386 g

Walton

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة