FLEXISPOT EN2 Whole-Piece Standing Desk with Clamp Power Strip, 55 x 28” Electric Stand Up Height Adjustable Desk with Cable Management (Gray Frame + 55" Mahogany Top, 2 Packages)

So far I'm satisfied with this order. Delivery was fast and without any issues.So top and base comes as 2 different packages. At least in my case I was able to see delivery for both and in amazon tracking it showed delivered only when both parts were delivered. So that was nice! I got everything with in 2 days!Now I want to share my experience with assembly. I read reviews here that table is awesome, but there are issues with assembly and manual that they provided. In my case I didn't experience that at all and would say it's false. If you have put together something more than a basic IKEA furniture, than you will put this together with ease. I did it in 15 minutes. Instructions in manual are clear and I never had problem with confusing assembly orientation.One of issues I saw in reviews is crossbar adjustment, and issues only accrue if you don't strictly fallow instructions. In step 2. need to release screws and extend crossbar length, here just extend till max sign and don't tighten it. Make screws only lose enough so you can extend crossbar. As per manual only in Step. 8 when base is attached to table you tighten crossbar screws, these way don't need to guess how far need to extend crossbar.Now about table, it looks nice and is able to hold my heavy PC and two monitors with ease.At sitting position table is sturdy without any wobble, at almost max high that I use for standing, there is some wobble as it would be expected but it's not disturbing me at all. Unless you purposely shake table you will never notice it during regular use.Motor is fast and it goes from sitting to standing in few seconds.Only small con to this table is, adjustment device cables are short so you can only put it on right side where motor is, I really wish it would come with some extension cables so I could put it on other side since predrilled holes are at both sides.Also the minimum position could be a bit too high for shorter people.Overall I'm happy with this table and hope it will last long!

I spent a week looking at all the options for standing desks, considering brands, models, features, prices, and reviews. I narrowed it down to either the FlexiSpot Pro (dual motor, three-tier legs) or this model, the EN1 (single motor, two-tier legs). The fact that there were many reviews from people perfectly happy with the EN1 at about $100 less than the Pro, I placed my order. I couldn't be more pleased with my decision.Shipping - I was prepared for receiving the two packages on separate days, but lucked out that they both arrived together within 2 days of ordering. The box for the desktop was torn, but the packaging on the inside (1cm dense foam and reinforced corners) protected it well. Both the desktop and the legs were supported by plenty of dense foam, and there wasn't a scratch anywhere.Quality of Materials - The desktop has a nice, smooth laminate/melamine finish. The corners are rounded, which my hips appreciate, and the edges are beveled. The pre-drilled holes are clean and provide options for installing the control on either right or left side. The legs, feet, and horizontal support bars are very heavy and nicely finished. The holes on the metal pieces are clean-cut with smooth edges. One thing that impressed me was the rubber pads (washers?) on key spots where the base attached to the desktop, providing an extra point of cushioning and stability. For those who are concerned about the description indicating the country of origin for this product is China (as indicated in the product information above), the packaging for the product I received actually says "made in Vietnam."Performance and Stability - Compared with my husband's more expensive Autonomous desk, the FlexiSpot EN1 transitions smoothly, quietly, and quickly. Regarding stability, I find the desk to be extremely solid, even in the higher-standing positions. My monitors have a slight amount of shake when I type, but that's only because they're freestanding on the cheap plastic frames they came with. I have no doubt that if I attached my monitors to a quality monitor arm, I wouldn't have any shaking. And for what it's worth, my husband's Autonomous desk has the same amount of minute vibration as my FlexiSpot EN1. If you really want to avoid any shake at all, go with FlexiSpot's newer four-legged "Odin" model.Assembly - you've probably seen multiple reviews complaining about the lack of good assembly instructions. I'm a 66-year-old female and assembled this desk in about an hour and a half, by myself with absolutely no difficulty. I only asked for help to turn the desk upright. Honestly, if you've ever put together something from Ikea, you'll have no problem. The key is to be methodical and don't rush. Check off each item on the list as you unpack it. Pay close attention to the position of the piece you're assembling as compared to the picture. The materials are clearly labeled, and I thought the assembly went very smoothly. Yes, there are 4 holes that are not pre-drilled (2 for securing the horizontal support bar to the desktop and 2 to attach the control panel to the top), but with a little pressure, you'll easily be able to drive the screws in with just a phillips head screwdriver. Once assembled according to the instructions, the desk required absolutely no leveling or adjustments.Cable Management - The FlexiSpot EN1 has a shelf to support the desk power box, and that's it. They do include a few sticky-back cable clips, but I wanted something more sturdy. I got the HOMEPROTEK Under Desk Cable Management Tray and some Alex Tech Cord mesh tubing (both from Amazon), and I was able to organize all the cords for my PC, two monitors, speakers, and tablet charging cable.

The table is nice, solid and seems to be durable. I like it so far and recommend it👌But think twice if you want to buy a black desk, cause almost every touch of your hand would leave a mark on the surface and give the desk a “greasy” look. So consider other colors.

اطولة جداً جداً ممتازة توصيل سريع جاتني اطوله بعدها بيوم جتني الأرجل تركبها سهل ان كنت تبي تركب من الكتيب تبعها او من يوتيوب اطوله واسعه ومتينة وثابتة تتحمل شاشتين وبيسي وزياده كمان وطبعاً اطولة تحكم كهربائي تحكمها مره رايق ترفعها و تنزلها بالمقدار يلي يناسبكم بنسبة لي والله تستاهل ١٠٠٪؜ اطولة مقارنه بسعرهاااا خرافية خذوها وانتم مغمضين يلي يبحث عن طاولة ومحتار لاتروح عن هذي ابداً

I recently purchase the table, the delivery was quite fast. The package comes seperatedly in two orders.The assembly took some effects, but the motor is quiet and powerful, making height adjustments super smooth. My son has claimed the table as his study area now. Highly recommended!

Does the work. Good sturdy

I purchased it for working from home and to help with my poor posture habits.The desk is pretty easy to assemble and has several options for various heights, and manual adjustment to suit your desired positions. The unit is quiet when operating and whilst it includes several sticky-backed cable attachments for running the included power pack, they fell off within a week and I had to mount my own.It could also do with other mounting options for things like a power board so that you're not dragging cables up and down when you raise and lower the desk, and for running those cables neatly to your devices, but these are minor gripes, and for the price I paid, I did not object to a quick run to the hardware store for these items.If I needed another one, would I buy this again? Yes.